Hi Mark, for a size 11, you will want to go with the XL size. It has a 10-12 size range. If you have any other questions, please feel free to email me direct at augiej@diverightinscuba.com.
The Hollis fins are made in the Hollis factory in Taiwan. If you have any other questions please give us a call at the shop at 815-267-8400.
by Rich
10 years and 5 months ago00
Answer this Question
Ask a New Question
Customer Reviews
Overall Rating
5
Perfect for dry diving
Review byScott
I have tried multiple pairs of fins, and these are the only pair that let me get a perfect trim when diving dry - even without ankle weights. They are also really easy to use for pinpoint control - a simple ankle flick can get me coasting a few inches, and another will stop me. These are definitely my go-to diving fin.
Of course, traveling with them is harder because they are noticeably heavier than my other fins (plastic/splits).
Overall Rating
5
Powerful fin!
Review byMark
These fins will really move you through the water! The spring straps are well built and hold the fins on nicely even during hard kicking. They are negatively buoyant so they will keep you trimmed well when diving dry.
Overall Rating
5
f1 fins
Review bygabriel
Bought xxl to fit my size 12 rockboots in and they fit perfect. Very powerful fin when kicking in current. Love that they come already with the spring strap installed. They are a lil heavy making it so i dont have to use ankle weights.
Overall Rating
5
Best Fin On the Market!
Review byDante
This is an incredibly powerful fin, really made for frog kicking. My frog kick got twice as strong switching from Mares Volo Power. Flutter and scissor kick aren't as powerful due to the shape of the fin, but still no issues. XL was a perfect fit with US size 11 Fourth Element boots.
Overall Rating
5
Great fin so far!
Review byBrandon
I ordered these because I noticed my feet were a little light when diving dry. They helped my trim and my kick is much more powerful and I have much better control in reverse and with helicopter turns. Hopefully I can keep using them when I switch to wet this summer. For reference I wear a size 13 bootie over drysuit socks and fit the XL with room.
Overall Rating
5
Great Tech fin
Review bychad
I use these fins for my tech dives and I couldn't ask for better. They are very comfortable, come standard with metal spring straps, and are very rigid to allow more power per kick (super important with the extra drag from all of the extra tanks). They are a little big in the toes if you are planning to dive with normal wetsuit boots but fit perfectly with my BioDry with intergrated boots.
Overall Rating
5
Great fins for drysuit
Review byAbdul Aziz
These are not as stiff as Jets but have a better foot pocket and spring straps. Very easy to slide on and off. They also provide a strong thrust with each kick. One of the best solid rubber fins out there.
Overall Rating
4
Great fin for dry suit diving
Review byEric V
These are great fins for cold water local diving. Of the fins I have they are the easiest to do the back kick in. The L size fits my White's size 10 drysuit boots perfectly and I would never consider a fin without spring straps, especially after using these.
I usually don't travel with these fins even thought they fit my full-sole wetsuit boots just fine. They are pretty heavy and my checked bag always seems to be right around 60 lbs, so I tend to leave these home for tropical trips.
Overall Rating
5
Review byPierre Donvez
Great fin for diving in drysuit as they are quite negatively buoyant in the water, they are a bit on the pricey side tho. I use the ones with the yellow tip which are great for higher visibility in no viz conditions.
Overall Rating
5
Review byIza Ding
The F1 tech fins are a must have. They are heavier than other fins and are slightly negative in water, which can be a pro because I need less weights. They allow powerful kicks but can be tiring for long surface swims. They work well for tight environments like caves and wrecks.
