USUN SBT 15/40-OL Booster Pump

USUN GAS BOOSTERS

USUN produces high-quality gas boosters that can be used with oxygen, helium, air, argon, or any other gas that you need!

Key features
1. Reliable, Easy to maintain, compact, and robust
2. No heat, flame, or spark risk
3. Infinitely variable cycling speed and output
4. Air-driven Models do not require an electrical connection, and are easy to apply with automatic controls
5. No limit or adverse effect to continuous stop/start applications
6. Seals system designed for long working life, no airline lubrication required
7. Built-in coupling system (Most models) and suitable for most gases boosting

SBT15/40
- Double Action booster, great for scavenging your supply cylinders down to ~100psi
- 70cm x 40cm x 30cm
- Oxygen cleaned
- 40:1 pressure ration
- High-pressure piston rod 32mm/20mm
- Minimum inlet pressure 7 bar

- SBT 15/40 is great for a diver boosting cylinders up to AL80 cu/ft but it is most efficient boosting cylinders less than 40cu/ft in size.

- Maximum supply pressure 45 bar. You will need to regulate your supply cylinder pressure down to less than 45 bar to use this booster. The GB40 / GBD40 / XB30 / XBD30 dont require this regulation of supply gas.
- Maximum outlet pressure 330 bar
- Outlet pressure formula 40PA+2PI
- Inlet port size 1/4"NPT
- Outlet port size 1/4" NPT

Drive Gas: 

• The user can use compressed gas from scuba cylinders or a compressor. The manufacturer recommends 24 cfm to run the booster 60-70 cycles per minute. This is well above the speed we run our booster for safety. We have clients who have success using this booster with 8-10cfm and slower fill rates. It is recommended to use a dryer and filter before plumbing your shop compressor into the booster.
• Maximum drive gas pressure 8 bar.