Description
USUN Gas Booster Hose and Whip Kit by USUN
USUN Gas Booster Hose and Whip Kit: The Complete Connection
Buying a gas booster is only the first step in building a fill station. Most boosters arrive as a bare pump, leaving you to scramble for the right fittings, hoses, and gauges. We solve that headache with this comprehensive Hose and Whip Kit. Built to order specifically for the USUN XB30, XBD30, GB40, or GBD40 models, this kit bridges the gap between your supply tanks and your booster, getting you ready to blend gas safely and efficiently.
Versatile Supply Connections
Gas logistics can be messy, with Oxygen coming in one type of cylinder and Helium in another. Our system comes with three interchangeable connections: DIN, CGA-540, and CGA-580. This allows you to pull gas from standard scuba tanks, industrial oxygen cylinders, or helium/argon banks without needing multiple expensive whips.
Precision Filling
On the output side, the kit features a fill hose topped with a DIN filler. Accuracy is everything in gas blending, so we integrated a digital gauge right into the assembly. The hose also features a line valve and a bleeder system, giving you complete control over the flow and allowing you to depressurize the line safely before disconnecting from the cylinder.
Quick Assembly
You shouldn't need a wrench every time you want to set up or tear down your station. We include quick disconnects for the booster's inlet and outlet ports, allowing for rapid assembly and storage. Additionally, we provide an adapter for the drive gas port, converting it to a standard 1/4-inch NPT female fitting so you can easily plumb in your compressor.
- Important Note: This kit does not include the low-pressure drive gas hose that connects your shop compressor to the booster. You will need to source that separately based on your compressor's specific connection.
WARNING: Compressed Gas Safety & Assumption of Risk
Oxygen Service Warning (Fire & Explosion Hazard)
Oxygen-related fires and explosions can result in serious injury or death. These products ship oxygen clean. This "clean state" applies only prior to its first use. Once this equipment is used, you are solely responsible for ensuring and maintaining its oxygen-clean status. Periodic inspection and cleaning by a qualified technician are a necessity for continued oxygen service.
Inert Gas Warning (Asphyxiation Hazard)
NEVER breathe pure, unblended inert gases such as helium or argon. These gases displace oxygen and can cause sudden unconsciousness and death in seconds, with no prior warning symptoms.
- Pure inert gases must ONLY be stored in compressed gas cylinders with a designated CGA-580 valve.
- NEVER use ordinary diving cylinders or SCUBA valves to store unblended, pure inert gas.
Your Responsibility & Assumption of Risk
As the user of this equipment, you must meticulously follow all recommendations and regulations from the US Department of Transportation (DOT), Compressed Gas Association (CGA), all other federal/state/local agencies, and your dive training agency. This includes all rules for the equipment's maintenance, handling, storage, labeling, filling, transport, and use. By purchasing and using this equipment, you personally and fully assume all risks associated with the use of any compressed gases.
Stop hunting for fittings and start blending. Order your USUN Gas Booster Hose and Whip Kit today!
Features
- Universal Supply Hose: Includes adapters for DIN, Oxygen, and Inert Gas cylinders, eliminating the need to buy separate hoses for different gases.
- Digital Accuracy: The fill hose features a digital gauge for precise pressure readings during critical blending operations.
- Flow Control: Integrated line valve and bleeder allow for precise filling control and safe depressurization before disconnecting.
- Quick Disconnect System: Fitted on the inlet and outlet ports to allow for fast setup and breakdown of the booster system.
- Turnkey Solution: Includes all necessary high-pressure hoses and fittings to connect the booster to supply and fill bottles immediately (drive hose excluded).
Specs
- Brand: USUN / Dive Right In Scuba
- Compatibility: USUN XB30, XBD30, GB40, GBD40 Boosters
- Supply Connections Included: DIN, CGA-540 (Oxygen), CGA-580 (Inert Gas)
- Fill Connection: DIN
- Drive Gas Adapter: Converts to 1/4" NPT Female
- Gauge Type: Digital
Reviews
Product Q&A
Easy Returns
60-Day Hassle-Free Returns
Not the perfect fit? No problem. We offer a 100% credit or refund on any item returned within 60 days, as long as it's in new, unused condition with its original packaging. We want you to be happy with your gear, period.
Click here for more info100% Secure Shopping
Order With Confidence
Your security is our top priority. We use the latest encryption technology to ensure your personal information is 100% safe, so you can shop with total peace of mind. Not comfortable ordering online? Give us a call at (815) 267-8400 and we'll gladly help you over the phone.
Full Manufacturer's Warranty
Authorized Retailer for USUN
We are an Authorized Dealer for every single brand we sell. This means you are getting 100% authentic gear, and your purchase is fully protected by the manufacturer's warranty. No gray-market gear, no warranty worries. We've got your back.
Our Promise to You
We\’re Divers, Just Like You
Our promise is that you get the right gear, and that it's right the first time. As divers ourselves, we'll help you find the perfect fit for your style of diving. Then, we'll quality-inspect your order before it ships to ensure it's ready for your next adventure. We're your local dive shop, no matter where you are.