USUN GBT 15/40-OL Booster Pump

USUN GAS BOOSTERS

USUN produces high-quality gas boosters that can be used with oxygen, helium, air, argon, or any other gas that you need!

Key features
1. Reliable, Easy to maintain, compact, and robust
2. No heat, flame, or spark risk
3. Infinitely variable cycling speed and output
4. Air-driven Models do not require an electrical connection, and are easy to apply with automatic controls
5. No limit or adverse effect to continuous stop/start applications
6. Seals system designed for long working life, no airline lubrication required
7. Built-in coupling system (Most models) and suitable for most gases boosting

GBT15/40-OL
- Double Action booster built to scavenge your supply gas down to ~100 psi
- 70cm x 40cm x 30cm
- Oxygen cleaned
- Piston Rod 40mm/25mm
- 40:1 pressure ratio
- Minimum inlet pressure 7 bar

• Maximum inlet pressure 45 bar. You must regulate your supply gas down to 45 bar before feeding it to the booster.
  - Maximum outlet pressure 330 bar
  - Outlet pressure formula 40PA+2PI
  - Inlet port size 3/8"NPT
  - Outlet port size 1/4" NPT
  - Air Drive port G1/2"
  - Maximum drive gas pressure 8 bar

Drive Gas: 

• The user can use compressed gas from scuba cylinders or a compressor. The manufacturer recommends 28 cfm to run the booster 60-70 cycles per minute. This is well above the speed we run our booster for safety. We have clients who have success using this booster with 12cfm-16cfm and slower fill rates. It is recommended to use a dryer and filter before plumbing your shop compressor into the booster.
• Maximum drive gas pressure 8 bar.