XS Scuba Pro/Convertible Pro/Convertible Manifold
<div style="text-align: justify"> This new manifold is the result of many thousands of dollars in engineering, research, and tooling development. Built with the inspiration and the tradition of the widely famous THERMO Isolation Manifold, the new XS Scuba isolation manifold retains the shape, high luster exterior plating, and interior design of the THERMO, while offering several design changes that are individually small, but collectively represent a gigantic improvement.<br />
<br />
<span style="color: rgb(255,0,0)"><span style="font-style: italic; font-weight: bold">FASTER ON AND OFF - FEWER KNOB TURNS</span>. </span> The XS Scuba isolation manifold offers a redesigned bonnet that provides complete valve opening in 1 1/2 turns of the valve knob. This is a feature allows for faster valve shut-down and is a feature of interest to most dual cylinder and technical divers. Comes with Red/Green Safety Handwheel<br />
<br style="font-style: italic; font-weight: bold" />
<span style="color: rgb(255,0,0)"><span style="font-style: italic; font-weight: bold">HEX-KEYED DIP TUBE</span>.</span> The XS Scuba isolation manifold allows for the insertion of a 5/32" hex key in the end of the dip tube. This eliminates the need to use pliers on the plated tube surface during the installation process.<br />
<br />
The XS Scuba isolation manifold is available in both the 200 BAR International or the 300 BAR DIN openings. Left and right hand valves, along with the isolation connector, come packaged as a single unit for easy ordering. Each valve includes the plugs to allow use of the individual valves on single cylinders. Both versions feature 3/4" threaded tank inlets to fit all modern scuba cylinders. Each valve comes with a 5200 PSI safety assembly installed.<br />
</div>
<p style="text-align: center"><input alt="Valve Internals" src="/catalog/media/descriptions/528d08f9858fe-valveinternals.jpg" type="image" longdesc="undefined" />
Loading...
- SKU
- VMX200-3XN-VI
As low as:
$314.95
As low as:
As low as
$314.95
Description
- PRO outlet, with spin-out insert, allows for DIN or yoke connection
- XS Scuba Safety Handwheel - know at a glance that your valve is 100% open
- 1.5 rotations of the handwheel from fully on to fully off
- Center-to-center distance: 215 mm (8.46 in) +/- 5 mm (0.2 in)
- 3/4”-14 NPSM standard inlet threads
- On/Off seat built from high strength brass with nylon seat and PTFE plated for years of smooth operation
- One-piece safety assembly protected within the body of the valve
- O-ring sealed bonnet
- Modular access plugs (R/L) included for use as single valves
- Screw-in dip tube with hex wrench tighten feature
- Meets the requirements of CGA V9-2009 standards
More Information
| Product Name | XS Scuba Pro/Convertible Pro/Convertible Manifold |
|---|---|
| Brand | XS Scuba |
| Price | $0.00 |
| PreOrder | No |
| Special Order? | No |
| Ships from Manufacturer? | No |
| Product Type | Tanks |
| Prop 65 | No |
| Description | - PRO outlet, with spin-out insert, allows for DIN or yoke connection |
| Stock Status | No |
| Discontinued | No |
| Sold Out | No |
| Only Advertise | No |
| Call For Price | No |
| On Sale | No |
| Allow In Best Selling Product List | Yes |
| Black Friday Deal | No |
| Ready to Ship | No |
| Upgrade to 2nd Day FREE Shipping | No |
| SnapShip | No |
| Blog Description | This item is on our blog, click to read the article |
| Bestseller Green Frame | No |
| Is Featured | No |
| Item Returns | This item can be returned |
Reviews
Overall Rating
5
Great isolation valves
Review by
Alb
This is a good manifold for doubles. I use this with 100 hp tanks. It is nice to have 200 cu ft of air with a redundancy of isolation valves.
Overall Rating
5
Good valve
Review by
David
This is good for doubles and having redundancy since it has isolation shut off valves. It is well made and priced.
Overall Rating
5
Versatile valves
Review by
michael
These are great versatile valves; I have and own both the older version and the new indicator version. I changed the knobs out for the old non-indicator knobs on the new set; I just like the feel of them better.
As for the manifold it has held up very well over the 15 years of using it, mine came with plugs so I could remove the middle bar and use them as single tank valves or doubles.
I have run them in both single and double modes, along with din and yoke modes with no complaint at all. I like that the knobs are as large and long as they are it makes using them very easy, specially on deep cold dives were I am using heavy gloves. It is very easy to find and use the center valve when you need to cut off a tank/reg unit due to free flow or damage. It has saved my dive on many occasions.
As for the manifold it has held up very well over the 15 years of using it, mine came with plugs so I could remove the middle bar and use them as single tank valves or doubles.
I have run them in both single and double modes, along with din and yoke modes with no complaint at all. I like that the knobs are as large and long as they are it makes using them very easy, specially on deep cold dives were I am using heavy gloves. It is very easy to find and use the center valve when you need to cut off a tank/reg unit due to free flow or damage. It has saved my dive on many occasions.
Overall Rating
5
Review by
will mcmanus
I have two sets of these manifolds and am quite happy with them. I like the size of the knobs as i feel like it provides a better grip. Valves are high quality and are what i use on all my tanks. While the color indicator is gimmicky, I like it.
Overall Rating
4
Review by
Douglas Boyce
After my favorite valve maker ended its foundry contract, Thermos have become my mainstay and these are re-branded Thermos. I have the earlier version of the Thermo manifolds on two twinsets and have never had a problem. If you don't like the big color coded handles, they are easily replaced with the old rubber ones for a few dollars. The only practical difference I saw between the older and the newer versions was the crush washer was replaced by an O-ring. Parts are easy to come by for these and they are easy to maintain.
Overall Rating
3
Review by
Andy Connor
No complaints with regard the service from Dive Right in Scuba, product arrived quickly - even though it was an international order. Keep up the good work, guys.
As for the product, the manifold that was delivered was slightly different than that shown on the website. The manifold that was delivered had a plastic insert under each valve knob that changed colour from green to red as you close/open the valve. Personally, I think this is a gimmick - if you can't tell whether your valves are open or closed then.....! Potentially of use to sidemount divers, but I wouldn't trust that as any other than an indicator. I would always check the valves physically.
The knobs on the valves are huge - in terms of girth because they need to accommodate the plastic insert mentioned above, but they are also hugely long as well. The first thing I did was strip the handles and plastic inserts off and replace them with more compact knobs.
Other than the knobs, the manifold appears well made and is functionally fine.
As for the product, the manifold that was delivered was slightly different than that shown on the website. The manifold that was delivered had a plastic insert under each valve knob that changed colour from green to red as you close/open the valve. Personally, I think this is a gimmick - if you can't tell whether your valves are open or closed then.....! Potentially of use to sidemount divers, but I wouldn't trust that as any other than an indicator. I would always check the valves physically.
The knobs on the valves are huge - in terms of girth because they need to accommodate the plastic insert mentioned above, but they are also hugely long as well. The first thing I did was strip the handles and plastic inserts off and replace them with more compact knobs.
Other than the knobs, the manifold appears well made and is functionally fine.
Write Your Own Review