SARR Front Entry Diving Drysuit

Model Shown: The model is shown with SI TECH valves upgrade.

Materials: Tough, Military Spec high tenacity 210 denier High Count nylon in Sea Rescue Orange for high visibility. High Count nylon contains more threads woven into each square inch of fabric. The resulting fabric has a very tightly packed weave for extraordinary abrasion and puncture resistance. All seams are made with quadruple interlocking stitching for strength and then fusion sealed inside for water tightness.

Waterproof Coating: The 210 HC nylon is triple coated with 6-7 ounces of polyurethane on the inside of the fabric for protected waterproofing, Two solutions coats of polyurethane are impregnated deep into the fibers of the nylon. A high molecular density layer of polyurethane is then laminated to these solution coats for total waterproofing and for internal abrasion resistance.

Safety: SOLAS reflective tape down arms and around wrists

Reinforcing: 500 Denier Cordura™, textured nylon for improved slip control. Includes Butt pad (not shown) and patented Wraparound Knee pad providing double layer protection for the front and back of each lower leg. Pad extends up the front of the thighs and into the lower lap area.

Valves: IDC low profile, swivel nipple inlet/low profile automatic exhaust with gaskets installed are standard. (Three year warranty). Low pressure hose is included.

Seals: Longlife Latex™ rubber neck and wrist seals are thicker and more durable, yet thin and flexible enough to insure a comfortable fit. All Longlife Latex seals are easily replaceable.

Footwear: Polar Boots are standard. Polar Boot features include a 7.0 mm neoprene inner with rubber dipped outer, a durable walking sole, a low profile toe that fit easily in a fin, reinforcing for wear areas, fin keeper heels and easy flex ankles. Longlife Latex socks are a no charge option.

Entry: Horizontal Front entry using a diving grade #8 brass tooth zipper.

Suspenders: Suspenders are included.

Pocket: Includes a large Bellows Pocket on the outside of the right leg.

Testing: Each drysuit is tested under water and under pressure.

Warranty: Two year limited warranty. See Warranty page.

Made in the USA: All OS SYSTEMS drysuits are manufactured in the USA in Scappoose, Oregon.