Glue-On Drysuit / Wetsuit Pocket

Great basic add-on pocket. One easily holds my C4 dive light or my SMB and reel. I haven't really used the mesh inside pocket yet, which is pretty small. Its probably ok for a slate or something like that but I can't fit anything substantial in there. The pocket seems to drain well, dries quickly, and if placed as a thigh cargo pocket is completely out of the way but well within easy reach. I have 2 and they hold more and are easier to reach than the pocket on my Zeagle Ranger BCD. The pockets attach easily, probably about 20-30 minutes of work, most of which is spent waiting for it you cure, and then 24 hours of letting them sit to fully cure. The 1/2 oz of aquaseal they come with is less than half of what you need to really attach them. I used 2 tubes to attach on pocket and still wound up with a little area around the edge that didn't seal as well as I'd like. I recommend at least an oz per pocket, possibly a little more depending on how you attached it.

This is a good pocket to hold your spare mask and a couple of little things. Fairly well built and easy to apply to your wet/dry suit. Only issue I had was the glue quantity that comes with it is about half of what I wanted to use, so I got another 0.75 tube, which worked perfectly.

Added this to my Bare Trilam Tech Drysuit to carry extra mask, size is perfect. Easy to apply as directed with supplied aquaseal, I had a little extra on hand and used that too. Like other reviews here the trick is to take the time to let the glue set up. I found using soft weights worked well. Pocket has been on for about year and still holding up just fine after 30+ dives. The Velcro on the pocket is very large so there is no worry about it coming undone during a dive. Great product form XS scuba and Great Price once again for Dive Right! Thanks Steve

This is a good additional pocket for your drysuit. It is easy to install and has a nice mesh divider to keep your gear organized.

first, get aqua seal with it as there isn't enough in what they give you.

second, make sure you cut out the divider before you glue it on, I did that on my first pocket and forgot to on the second. no point in the divider.

plenty big for my spare mask+reals+smb in the left pocket.

great value for the price

I put these on a DUI TLS 350 and they worked out great. I agree with Tristan above, they need more Aquaseal than provided, but I had an extra tube lying around and all worked out. Applied and let set overnight and dove them the following morning without a problem

The pocket itself is very nice (looks better than the picture) the size is great and it seems sturdy, it comes with a mesh divider which i cut out. The Aquaseal that comes with the pocket works well, but there isn't really enough to coat the whole pocket, so i would recommend picking up an extra tube just to be safe. Overall good service from DRIS.

In cold water, I use a White's Fusion Bullet. I love the thigh pockets on that suit and was missing them on my thin tropical water suit. These XS Scuba pockets are perfect for my backup mask, DSMB and spool and backup light. Easy to use and works perfect!

Great product. Great service. Fast delivery. Very easy to install. I plan to put these on all my suits.

I installed one of these on my bilam drysuit with some DRIS drysuit glue in the middle and aquaseal around the edges. It's holding up well after about 40 dives. The Aquaseal that came with mine was a bigger 2oz version for some reason, so that was a bonus for me. I had tons leftover. I cut the mesh divider out because it was annoying to me. Instead I use the bungee loop method to clip everything off.